The Revolution Contact two-way pedals are a quasi bear-trap design with a cleat binding on one-side and flat on the other, so you can use cycling shoes for more aggressive riding and trainers for running errands.
Cup and cone bearings turn on sturdy cro-moly axles but in common with many budget models benefit from a strip and liberal re-greasing-especially on bikes in hard service. As an experiment, I performed the operation on the right hand pedal only. After 150 miles, the left felt almost as smooth, suggesting they bed-in with use.
Cleat tension is easily adjusted using a 3mm Allen wrench. Being Shimano pattern, it follows that Shimano cleats work fine but curiously, other imitators such as Wellgo, Vp, Exustar and Winwood were better matched. Unusually these pedals are weighted so as to present themselves cleat side up for easy entry and quick getaways at the lights- Just flip them over to use the flat side.
There's approximately four degrees of float with the OEM cleats to keep knees happy and their broader surface area is great for scooting around town but have a tendency to ground out paired to 175mm cranks. Should this prove a problem, the steel cages are easily removed via four Phillips screws, giving a lower profile without overly compromising comfort and saving 25g into the bargain. Weather sealing could be improved-it's not poor by any means but I did note some contamination when immersed in gloopy mud but using good quality marine grease will keep the bearings happy and the elements firmly at bay.
They're not quite on a par with Shimano's M324 but then they're £20 cheaper and 66g lighter. Stick with Shimano for continental touring but the two- way are ideal for working bikes and commu-tourers.
Read the original review
Click here to buy online
