Praxis Works MTN 1X Wave Tech Chainring Direct Mount

Praxis Works MTN 1X Wave Tech Chainring Direct Mount

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminum and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.

Specifications:
For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks
Wave™ Tech alternating tooth profile for better chain retention
10/11/12sp Shimano/KMC/SRAM
Stamped and machined manufacturing with hard black anodizing for durability
REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
In very rough terrain, or just for pure security, we still recommend use of an upper guide

Compatability:
For Praxis Direct Mount MTB cranks or 3-Bolt SRAM style interface
RD- Must use with Mid or Long cage ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
In very rough terrain, or just for pure security, we still recommend use of an upper guide

WAVE™ TECH 1X
The Wave™ tooth pattern swings right to left alternating lateral force to each chain link to actively retain the chain. This design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions.
Designed with analysis of drivetrain friction, the Wave™ tooth actively engages the chain but generates much less wear than competing designs — spreading the load over large surface areas instead.