0845 257 0808
Specialized Fork Brake Hanger for Tricross

Specialized Fork Brake Hanger for Tricross

  • This is the cable-stop hanger required to route the front brake cable to the Tricross's cantilever brake.
  • Supplied with both standard and short-length fork crown bolts to cover every generation of Specialized Tricross.
    • PriceAvailability 
    £9.99In Stock

    Specialized Fork Brake Hanger for Tricross

    This is the cable-stop hanger required to route the front brake cable to the Tricross's cantilever brake.

    • The Specialized Fork Brake Hanger for Tricross is secured by a bolt that goes through the hole in the middle of the fork crown (the same bolt that would secure a mudguard).
    • Supplied with both standard and short-length fork crown bolts to cover every generation of Specialized Tricross.
    Barcode
    719676767444
    No reviews yet Submit a review
    Ask a question
    Q. Hi guys, similar question to the other one I'm afraid. Do you know if this would fit the drilled hole on the forks of my Cannondale CAADX? It appears to be for guards or racks, is a 2011 carbon blade fork. I'm in the process of trying to eliminate fork judder.
    A. The Specialized fork brake hanger will fit your CAADX fork (provided you do not already have mudguards fitted using the hole in the fork crown). The lower mount position should help reduce and (hopefully) eliminate brake judder providing this is the cause.
    Q. Will this attachment work better for Canti brakes on an Easton ea70x cross fork rather than using an stem hanger?
    A. As far as we are aware the Easton EA70x Fork is not drilled right through at the crown so would not be compatible with the Specialized Fork Brake hanger. You would therefore need to run a stem hanger such as the Tektro hanger . Each option has its advantages but neither should affect braking performance. The stem hanger can add to your stack height but also can look cleaner and allow for the easier fitting of mudguards if required.